To understand the internet protocol you must first understand what the internet is. Mainly the internet is composed of groups of computers, each group may be represented by a street or a zone and theses groups are connected together through devices called gateways. When one computer in a zone wants to send data to another computer, it may be in the same zone or another zone and this computer may be a regular host or a server. The device that connects these zones is called gateways or routers and the methods that they follow to send the data are called protocols. Each gateway may be configured to use a certain protocol but it must be the same among all the zones in order for work properly. The internet uses what are called TCP/IP between these zones in order to send the data. The IP protocol is used to deliver the packet between the source and the destination based on IP addresses which is defined within the protocol. The ip addresses are 32 bits long and are separated in two parts: one part defines the zone or the area within which the host rely, and the other part defines the host itself. This corresponds to street identification where we must identify the street name and the number of the house. The street name corresponds to the network address and the house number corresponds to the computer address. If you need any kind of information on this article-related topic click here whoer.net ip Once the IP addresses are defined the gateways can use these addresses to forward the packets between the gateways until they arrive to the destination. Recall that these gateways are like airports which are used to travel between countries and the zones on the network correspond to these countries, so when the data travel between different zones they must first go to the gateways in order to be forwarded.